Product Detail
The metal electric immersion heaters are designed for the demands of corrosive chemical heating, with a vast array of configurations available such as open tank, screw plug and flange. We offer different sizes as small as 500 watts for laboratory environments and as large as 36,000 watts for industrial applications.
Standard and custom configurations for over-the-side and bottom installations in open tanks. Thermal overtemperature protection standard (except screw plug), and our heaters have certified by CE and ISO9001:2008.
Detailed information:
1. The heaters are made of seamless metal tubes(SUS304, SUS316 and titanium), three elements of diameter 50mm, in "Z" shape.
2. Power of the heaters is designed according to the location of installation, liquid chemical propoties and the deposition of the solid contents in liquid.
3. Hot-zone length of the heaters depends on the power of the heaters, different power, different hot-zone length. And the cold-zone length is flexible, it should be designed according to customers' equipment requests.
4. For safety design principle, the hot-zone of the heaters should be at least 100mm below the chemical liquid level.
5. With voltage of 110V/P, 220V/P, 380V/P, 220V/3P, 380V/3P, 415V/3P and power range from 0.5kw to 36kw.
6. All heaters are matched with overheat protection switch or heat detector.
7. All heaters reach the international standard, which insure the reliability and service life.
